|
Do it yourself
| |||
| ||||
How to Reset the Service on the Mercedes GLA
Model: Mercedes Gla
W156, MK 1
- Years:
2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
To reset the service on the Mercedes GLA, start by turning the ignition to position 1 (instrument cluster on); using the left arrow button (left spoke of the steering wheel), scroll until the vehicle's mileage (trip) appears; press the right spoke button (with the phone icon) and the "ok" button (left spoke) simultaneously until a settings list appears; scroll down with the left arrow until you reach "assyst plus" and press the "ok" button; scroll down to "full service" and press the "ok" button; scroll down to "conf. Full serv." and press the "ok" button; select the type of oil grade used by scrolling down and press the "ok" button; scroll down to "yes" and press the "ok" button; scroll down to "confirm" and press the "ok" button. The message "full service carried out" will appear, and finally, verify that the reset was successful by checking the "assyst plus" status.
Updated on 24 June 2026 by ScegliAuto
Related tutorials
Mercedes Gla
(2020-2026 /
MK 2, H247)
In this tutorial, we will see how to reset the service in the Mercedes GLA, a very simple and quick operation, to be performed only after completing …
Mercedes Gla
(2013-2019 /
W156, MK 1)
In this tutorial, we will see how to reset the service indicator in the Mercedes GLA, a very simple and quick operation that should only be done afte…
Mercedes Gla
(2020-2026 /
MK 2, H247)
In this tutorial, we can see how to reset the service in the Mercedes GLA, an extremely simple and quick operation, to be carried out only once all s…
Other guides you may be interested in
|
How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?
Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.049
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
