Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Instrument Cluster Bulb on a Mercedes E-Class?

Model: Mercedes Classe E W210 - Years 1995-2002
Part: Instrument panel light

To replace the instrument cluster bulb on a Mercedes E-Class, remove the cluster from its housing: it is not secured by any screws, so simply pry it out. Once extracted, disconnect the rear connector to completely remove it: at this point, you can access the bulbs at the back, which need to be pulled out and replaced with a new replacement part. After replacing, reconnect the instrument cluster and secure it back in its housing.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb of the Mercedes E-Class?
How to Replace the Headlight Bulb of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. To replace the headlight bulb of the Mercedes E-Class, lift the vehicle so that the wheel on the side of the bulb to be replaced is off the ground: therefore,.. …
How to Replace the Front Turn Signal Bulb on a Mercedes E-Class?
How to Replace the Front Turn Signal Bulb on a Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. the front turn signal bulb on a Mercedes E-Class, lift the vehicle so that the corresponding front wheel can be removed. You will also need to remove.. …
How to replace the front headlight bulb of the Mercedes E-Class
How to replace the front headlight bulb of the Mercedes E-Class
Mercedes Classe E (2002-2009 / W211) .. the front headlight bulb of the Mercedes E-Class is a simple and quick operation to be carried out independently. To replace the bulb, we need to.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos