Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset Tire Pressure Light on Mercedes CLA

Model: Mercedes CLA C118, X118 - Years 2019-2025
Part:

This brief video guide shows you all the steps needed to reset the tire pressure light on a Mercedes CLA, model produced from 2019 onwards. Start by turning on the vehicle's ignition without starting the engine. Next, press the menu button on the right side of the steering wheel and use the touch button to select "SERVICE", then choose "TIRE". After that, scroll down using the touch button to bring up the reset request on the display and finally confirm to complete the task.

Updated on 24 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Resetting Tire Pressure Light on Mercedes CLA
Resetting Tire Pressure Light on Mercedes CLA
Mercedes CLA (2013-2019 / C117, X117) In this simple video tutorial, you will learn how to reset the tire pressure light on a Mercedes CLA. First, before resetting the light, you must add…
How to Reset the Tire Light on a Mercedes CLA?
How to Reset the Tire Light on a Mercedes CLA?
Mercedes CLA (2013-2019 / C117, X117) In this tutorial, you will see how to reset the tire light on a Mercedes CLA. This operation is extremely simple and quick, and should be done only a…
How do you reset the tire pressure warning light on the Mercedes CLA?
How do you reset the tire pressure warning light on the Mercedes CLA?
Mercedes CLA (2013-2019 / C117, X117) To reset the tire pressure warning light on the Mercedes CLA, you need to inflate the tires to the correct pressure value: this value is indicated on…

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos