Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wiper on the Mercedes A-Class W176

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

See other generations:
Video tutorial

To correctly replace the rear wiper on your Mercedes A-Class W176 (2012-2018), you only need a few simple steps. First, park the vehicle on a flat surface and turn it off completely.

Then, go to the rear of the vehicle and lift the wiper arm. At this point, release the safety hook and slide the wiper arm off until it is completely removed. Finally, simply install the new wiper and reposition it correctly.


Updated on 17 August 2026 by ScegliAuto


Related tutorials

Removing and Replacing Windshield Wipers on the Mercedes A-Class W176
Removing and Replacing Windshield Wipers on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) In this video tutorial, you will learn how to remove and replace the front windshield wipers, and the same procedure applies to the rear wiper, on th…
How to Replace the Front Windshield Wiper Blades on the Mercedes Benz A-Class W176
How to Replace the Front Windshield Wiper Blades on the Mercedes Benz A-Class W176
Mercedes Classe A (2012-2018 / W176) .. windshield wiper blades on the Mercedes Benz A-Class W176. This operation takes only a few seconds and does not require any specific tools. After parking.. …
Where is the fuse box of the Mercedes A-Class W176 located?
Where is the fuse box of the Mercedes A-Class W176 located?
Mercedes Classe A (2012-2018 / W176) .. To locate the fuse box of your Mercedes A-Class W176, you only need a few seconds. All you have to do is read the instructions described in the.. …

How to Reset the AdBlue Warning Light on a Nissan Qashqai

Hello everyone! Today, I will explain how to reset the important AdBlue additive warning light on your Nissan Qashqai. Reset via the dashboard menu: turn on the car and ensure the instrument cluster is active. Scroll through the menu until you find the option “Service” or “AdBlue”. Select the “Reset” option and confirm. To top up the AdBlue level, open the tank flap and use the supplied nozzle to refill the AdBlue fluid with the engine off. Once the car is turned off and back on, the warning light should disappear if the refill was successful. Good luck.

Watch the video!


by ScegliAuto

More videos