Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Windshield Wiper Blades on the Mercedes Benz A-Class W176

Model: Mercedes Classe A W176 - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Windshield wipers

See other generations:
Video tutorial

This guide shows how to replace the front windshield wiper blades on the Mercedes Benz A-Class W176. This operation takes only a few seconds and does not require any specific tools. After parking the vehicle in a safe area and securing it, turn off the ignition and lift the wiper arms.

At this point, simply push the protective cover of the wiper blade anchor toward the tip of the arm. Once the part to be replaced is free, you can remove it. Replace it only with a blade that meets the specifications set by the manufacturer to avoid damaging the windshield or the contact parts.


Updated on 29 April 2026 by ScegliAuto


Related tutorials

How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) To replace the windshield wiper blades on a Mercedes A-Class, lift the arm connected to the wiper motor to detach the blades from the windshield. To …
Removing and Replacing Windshield Wipers on the Mercedes A-Class W176
Removing and Replacing Windshield Wipers on the Mercedes A-Class W176
Mercedes Classe A (2012-2018 / W176) In this video tutorial, you will learn how to remove and replace the front windshield wipers, and the same procedure applies to the rear wiper, on th…
How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
How to Replace the Windshield Wiper Blades on a Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) To replace the windshield wiper blades on a Mercedes A-Class, lift the arm connected to the blade away from the windshield. This will allow you to pr…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos