Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the windscreen from the Mercedes Class B?

Model: Mercedes Classe B W246, MK 2 - Years 2011-2019
Part: Windshield

To remove the windscreen from the Mercedes Class B, you need to disassemble all the components covering its perimeter: start by detaching the longitudinal bars located at the top of the car roof. Once these are removed, proceed by opening the bonnet and also detaching the plastic cover at the base of the windscreen. The windscreen can now be disconnected by removing the adhesive that holds it in its housing, allowing you to insert the new replacement piece; after replacement, remount all previously removed components.

Updated on 22 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Mercedes B-Class?
How to Replace the Battery in a Mercedes B-Class?
Mercedes Classe B (2011-2019 / W246, MK 2) To replace the battery in a Mercedes B-Class, open the bonnet and locate the plastic cover protecting the unit, positioned immediately under the wind…
How to Remove the Door Panel on a Mercedes Class B?
How to Remove the Door Panel on a Mercedes Class B?
Mercedes Classe B (2005-2011 / W245, MK 1) You can remove the door panel on a Mercedes Class B by loosening all the screws that secure it to its housing: once the screws are located, you will …
Replacement of the cabin air filter of the Mercedes B-Class
Replacement of the cabin air filter of the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) To prevent dirt and dust from entering the ventilation system of the Mercedes Class B, a specific filter has been installed. To keep it efficient, th…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos