Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Classe A
    4. : How do i replace the wiper blades on the Mercedes A-Class?

Mercedes Classe A - Video tutorial

Model: Mercedes Classe A W176 - Years 2012-2018
Part: Windscreen wipers
Operation: How do i replace the wiper blades on the Mercedes A-Class?

To be able to replace the wiper blades on the Mercedes A-Class, lift the arm to which the blade is connected, away from the windscreen. In this way it will be possible to press on the two lateral pins that connect the arm to the brush and remove the latter from its housing. Once the old brush has been removed it will be possible to replace it with a new spare part. This must be fitted inside the special pin on the arm. After installation, the windshield wipers can be lowered again by putting them in contact with the windscreen.


Posted on 12 March 2024 by ScegliAuto



How do i replace the wiper blades on the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. to replace the wiper blades on the Mercedes A-Class you have to lift the arm connected to the wiper motor, in order to detach the blades from the windshield...
How do you replace the windshield wiper blades on a Mercedes A-Class?
Mercedes Classe A (2018-2024 / W177) .. of the windshield wiper blades on the Mercedes A-Class is done by lifting the blades themselves so that they are not in contact with the windshield. Once..
How do you replace the wiper blades on the Mercedes A-Class?
Mercedes Classe A (2018-2024 / W177) .. the windshield wiper blades of the Mercedes A-Class you have to go and raise the blades, so that they do not directly touch the windshield. In this..

    Frequently Asked Questions

    • Classe A 2012-2018 - Why don't my Mercedes A-Class wipers work anymore? Read Answer
    • Classe A 2018-2024 - Where to top up the windshield wiper fluid on Mercedes A-Class? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos