Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to install the front windshield of the Mercedes GLC

Model: Mercedes Glc C253, X253, MK 1 - Years 2015-2022
Part: Windshield

In this guide we will see the main instructions useful for the installation of the front windshield of the Mercedes GLC, in simple and quick steps. Before installing the new windshield, it is necessary that the side parts are perfectly clean; then we gently place the windshield and apply the sealant on the sides, helping in the installation through the use of suction cups, as shown in the video. At this point we wait for the windshield to be properly fixed, allowing the sealant to dry, finally checking the correct sealing of the gasket.

Posted on 14 June 2025 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Windshield on a 2015 Mercedes GLC
How to Replace the Windshield on a 2015 Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) In today's video, you will see the main instructions for removing and replacing the windshield on a 2015 Mercedes Benz GLC. First, open the hood of y…
How to replace the windshield wipers of the Mercedes GLC 2
How to replace the windshield wipers of the Mercedes GLC 2
Mercedes Glc (2022-2026 / C254, X254, MK 2) To complete the procedure that allows you to independently replace the windshield wipers of your second edition Mercedes GLC, simply follow these ste…
How to Replace the Front Bumper Grille on a Mercedes GLC
How to Replace the Front Bumper Grille on a Mercedes GLC
Mercedes Glc (2015-2022 / C253, X253, MK 1) Follow these instructions to remove and replace the front bumper grille on a Mercedes GLC without removing the front bumper. First, open the hood of …

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos