Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Door Panel of the Mercedes A-Class?

Model: Mercedes Classe A W177 - Years 2018-2026
Part: Door trim panel

To remove the door panel on the Mercedes A-Class, loosen the screws that secure it to the housing: these screws are located at the bottom and on the right side of the handle. Once they are loosened and removed, use a tool to pry the door panel away from the housing completely; after the panel is detached, disconnect the underlying connectors to fully remove the old panel and replace it with a new one.

Updated on 28 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of the Mercedes A-Class?
How to Remove the Door Panel of the Mercedes A-Class?
Mercedes Classe A (2012-2018 / W176) .. To remove the door panel of the Mercedes A-Class, use a tool to pry off the trim located just below the window switch panel. Under the trim, you.. …
Remove the Door Panel on a Mercedes A-Class
Remove the Door Panel on a Mercedes A-Class
Mercedes Classe A (2012-2018 / W176) .. How to remove the door panel on a Mercedes A-Class? Don't worry, let's see how to proceed. Before starting the disassembly, disconnect the battery.. …
How to Remove the Door Panel of the Mercedes A-Class?
How to Remove the Door Panel of the Mercedes A-Class?
Mercedes Classe A (2018-2026 / W177) .. To remove the door panel of the Mercedes A-Class, loosen the screws that secure it: these are located to the right of the inner handle and underneath.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos