Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Turn Signal Bulb on a Mercedes E-Class?

Model: Mercedes Classe E W211 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Headlight bulb

See other generations:
Video tutorial

In this tutorial, you will see how to replace the front turn signal bulb on a Mercedes E-Class, a very simple and quick operation. First, ensure the key is not in the ignition, then open the hood and locate the small socket at the back of the headlamp on the outer side.

Next, grasp the socket, turn it slightly counterclockwise, and pull it out of the housing. At this point, you can remove the old bulb, connect the replacement, and reassemble everything by following the reverse procedure.


Updated on 24 September 2026 by ScegliAuto


Related tutorials

How to Replace the Turn Signal in the Mirror on a Mercedes E-Class?
How to Replace the Turn Signal in the Mirror on a Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. turn signal in the side mirror on a Mercedes E-Class, a very simple and quick operation. First, ensure that the key is not in the ignition. Then, tilt.. …
How to Remove the Turn Signal Bulb from a Mercedes E-Class Mirror
How to Remove the Turn Signal Bulb from a Mercedes E-Class Mirror
Mercedes Classe E (2002-2009 / W211) .. bulb located in the mirror of a Mercedes E-Class. This is a very simple operation: remove the mirror cover by gently prying with a screwdriver at.. …
How to Replace the Turn Signal on a Mercedes
How to Replace the Turn Signal on a Mercedes
Mercedes Classe E (1984-1995 / W124) .. how to replace the turn signal on a Mercedes E-Class produced until 1995. This routine maintenance task is very simple to perform on your own and may.. …

How to Reset the Tyre Pressure Warning Light on the Opel Mokka?

To reset the tyre pressure warning light on the Opel Mokka, turn on the ignition by inserting the key into the ignition switch. Once the ignition is on, navigate through the menu that appears on the dashboard by pressing the MENU button on the lever to the left of the steering wheel. When the tyre pressure option appears, press and hold the SET/CLR button located on the same lever. This will reset the warning light, and you can then turn off the ignition.

Watch the video!


by ScegliAuto

More videos