Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mitsubishi
    3. :
  3. Eclipse Cross
    4. : To reset the service light of the Mitsubishi Eclipse Cross.

Mitsubishi Eclipse Cross - Video tutorial

Model: Mitsubishi Eclipse Cross GK, GL, YA - Years 2018-2024
Part: Instrument cluster
Operation: To reset the service light of the Mitsubishi Eclipse Cross.

The manual reset of the service light on your Mitsubishi Eclipse Cross takes just a few seconds to complete correctly. Below we will discover how to perform the operation independently. First of all, enter the car and reach the driver's seat. Immediately after, turn on the instrument panel and locate the three buttons located in the lower right part of the panel itself. At this point, press the button with the up arrow several times and navigate through the onboard menu until you find the voice related to vehicle maintenance. Immediately after, hold down the center button of the menu and release it as soon as the display starts flashing. Finally, press it one last time to complete the reset.


Posted on 15 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos