Do it yourself
Frequently asked questions about cars and motorcycles

Model: Moto Guzzi Nevada
Part: Carburetor

Use a vacuum gauge to adjust the carburetor cylinders. Unscrew a carburetor screw (one on each side) on the sides of your bike and insert a perforated screw (to let the air pass) into the holes that are now free. If a part of the vacuum gauge goes higher it means that the carburation is not in equilibrium. Start the engine and adjust the carburetion using the appropriate air screws indicated in the video. As you work on these screws you will notice in the vacuum gauge if the adjustment is balancing or, on the contrary, is getting worse. This operation will regulate the entry of air and fuel into the valves in an optimal way.


Posted on 25 December 2023 by ScegliAuto



How do you replace the gearbox oil on the Moto Guzzi Nevada?
Nevada In order to replace the gearbox oil on the Moto Guzzi Nevada, you need to loosen the drain plug located at the rear of the transmission, in the lower
How is the maintenance of the Moto Guzzi Nevada carried out?
Nevada In order to perform the service on the Moto Guzzi Nevada, it is necessary to replace the oil and filters: to do this, you will need to loosen the dra
Moto Guzzi Nevada battery replacement
Nevada Let's see in this video how to remove and replace the engine battery of a Moto Guzzi Nevada, in simple steps. First we go to remove the seat of the b

How do you replace the clutch of the Sherco SE 250?

The clutch replacement on the Sherco SE 250 can be carried out by loosening the screws that secure the cover panel located on the right side of the motorcycle: once the panel has been removed, the underlying screws that secure the clutch discs can be unscrewed in order to insert the new ones. These can now be properly secured in their place and the panel can then be covered: after installation, it will be possible to verify that everything works correctly even after the replacement of the discs.

Watch the video!


by ScegliAuto

More videos