Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's tutorial, you will learn how to carry out routine maintenance on the Moto Guzzi Nevada 650, following the instructions provided below. Routine maintenance includes replacing and inspecting the main components subject to wear; it involves changing the engine oil and transmission oil, the tyres, and the front and rear brakes. Below, you will see how to replace the engine oil and gearbox oil, also replacing the filters; the replacement of the tyres and brake pads is illustrated afterwards, so follow the video until the end!

Updated on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How is the maintenance of the Moto Guzzi Nevada carried out?
How is the maintenance of the Moto Guzzi Nevada carried out?
Nevada In order to perform the service on the Moto Guzzi Nevada, it is necessary to replace the oil and filters: to do this, you will need to loosen the dra…
How to Replace the Gearbox Oil on the Moto Guzzi Nevada
How to Replace the Gearbox Oil on the Moto Guzzi Nevada
Nevada To replace the gearbox oil on the Moto Guzzi Nevada, you need to loosen the drain plug located at the rear of the transmission, in the lower central …
How to replace the air filter on the Moto Guzzi Nevada
Nevada Today we will discover the necessary instructions in order to disassemble and replace the air filter of the engine of the Moto Guzzi Nevada, in simpl…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos