Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How is the maintenance of the Moto Guzzi Nevada carried out?

Model: Moto Guzzi Nevada
Part: Checks and maintenance

Video tutorial

In order to perform the service on the Moto Guzzi Nevada, it is necessary to replace the oil and filters: to do this, you will need to loosen the drain plug located in the central lower part of the motorcycle. Once this plug has been unscrewed, you can proceed by collecting the oil and also removing the oil filter located in the same position: you can now top up the oil by inserting it through the vent on the left side of the motorcycle.

Finally, it will also be possible to replace the air filter from its housing located under the fuel tank.


Posted on 1 March 2025 by ScegliAuto


Related tutorials

How to Replace the Gearbox Oil on the Moto Guzzi Nevada
How to Replace the Gearbox Oil on the Moto Guzzi Nevada
Nevada To replace the gearbox oil on the Moto Guzzi Nevada, you need to loosen the drain plug located at the rear of the transmission, in the lower central …
How to Perform Maintenance on the Moto Guzzi Nevada 750
How to Perform Maintenance on the Moto Guzzi Nevada 750
Nevada In today's tutorial, you will learn how to carry out routine maintenance on the Moto Guzzi Nevada 650, following the instructions provided below. Rou…
Replacing the Battery on Moto Guzzi Nevada
Replacing the Battery on Moto Guzzi Nevada
Nevada In this video, we will see how to remove and replace the battery of a Moto Guzzi Nevada engine in simple steps. First, remove the motorcycle seat; th…

How to Remove the Rear Wheel of the GasGas EC 250?

To remove the rear wheel of the GasGas EC 250, first dismantle the chain by removing it from the sprocket attached to the rear wheel. Once the chain is removed, you can unscrew the nut that secures the rear wheel spindle and holds it to the swingarm. When the securing spindle is removed, you can completely take out the wheel from its housing and replace it with a new spare part. After replacement, refit the securing spindle and reposition the chain around the sprocket.

Watch the video!


by ScegliAuto

More videos