Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Moto Guzzi V7
Part: Engine oil

Warm up the engine for a few minutes to heat the oil in the circuit. This will make it less viscous, aiding its subsequent drainage. Unscrew the drain bolt located under the engine compartment and collect the used lubricant in a container (dispose of it properly at recycling centres). While the oil drains, unscrew the oil filter and screw on the new filter after lightly lubricating it. Close the drain hole and refill with the same amount of oil that was drained from the top hole as shown in the video. This operation is suitable even for less experienced mechanics.

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Engine Oil, Gearbox Oil, and Final Drive Oil on Moto Guzzi V7
Replacing Engine Oil, Gearbox Oil, and Final Drive Oil on Moto Guzzi V7
V7 Descriptive guide for replacing the engine oil, gearbox oil, and final drive oil on a Moto Guzzi V7. Obtain 2 litres of Motul 7100 10W60 oil, 1 litre…

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos