Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today’s video, we will see how to change the gearbox oil on a Moto Guzzi V7 II Racer, following the instructions below. First, position the bike on the stand and obtain the gearbox oil; in this case, we will use a good quality synthetic SAE 75w90. Now unscrew the bolt of the gearbox casing, allowing the oil to drain into a container; once finished, replace the plug and open the filler cap, which is located on the top. All that’s left is to pour the oil inside, filling to the maximum level (about one litre of gearbox oil)!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Moto Guzzi V7 Racer?
How to Change the Engine Oil on a Moto Guzzi V7 Racer?
V7 Ii Racer To change the engine oil on a Moto Guzzi V7 Racer, you need to loosen the plug located in the centre of the oil sump, which is positioned at the fron…
How to Adjust the Valve Clearance on the Moto Guzzi V7 II
How to Adjust the Valve Clearance on the Moto Guzzi V7 II
V7 Ii Racer This guide provides instructions for adjusting the valve clearance on the Moto Guzzi V7 II. First, place the motorcycle on a stand and begin by remov…
How to Replace the Air Filter on a Moto Guzzi V7II?
How to Replace the Air Filter on a Moto Guzzi V7II?
V7 Ii Racer To replace the air filter on a Moto Guzzi V7II, loosen the bolts securing the seat to its housing: this allows the seat to be removed, giving access …

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos