Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fitting the 2nd Customisation Kit

Model: Moto Guzzi V7 Iii
Part:

This video is currently unavailable

As is advisable whenever performing maintenance on a motorcycle, secure your Moto Guzzi V7 III on a stable and safe stand. This way, you ensure the operator's safety.

Now, unscrew the bolt on each mirror and continue unscrewing them to remove from their position and replace them with the two new mirrors. Once done, proceed to replace the two levers for the brake and clutch.

Use a screwdriver and the appropriate spanner to unscrew the bolt that acts as a brake. For the clutch, remove the clutch cable.

Finally, position the new levers in their place. For the clutch lever, in addition to screwing in the bolt/pin, you must also attach the cable.

And that's it!


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Guzzi V7 III Customisation Kit No. 3
V7 Iii First, ensure your Guzzi V7 III is stable and secure to guarantee the operator's safety. This step should be taken every time maintenance is performe…

How to Replace the Silencer on a Ducati Monster 696

This guide will show you how to remove and replace the silencer on a Ducati Monster 696 motorcycle, following the instructions below. First, place your motorcycle on a stand and start by unscrewing the fixing screw for the exhaust bracket. Then, disconnect the spring to remove the silencer from the exhaust manifold, as shown in the video. At this point, modify the manifold to install the new exhaust terminals; replace the entire exhaust if necessary by unscrewing the manifold nuts and applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos