Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the fork oil on the GasGas EC300, first remove the front wheel by disconnecting the brake caliper and removing the central pin. Once the wheel is removed, loosen the bolts that secure the fork at the top and completely remove it. Now you can remove the bolt at the top of the fork to extract the internal spring. This will allow the old oil to drain out and new oil to be added. After the replacement, reinstall the fork.

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Fork Oil on the GasGas EC300?
How to Change the Fork Oil on the GasGas EC300?
Ec 300 To change the fork oil on the GasGas EC 300, loosen the bolts securing the fork at the bottom, near the wheel, and at the top, near the handlebars. O…
How to Change Transmission Oil in EC300 GASGAS
How to Change Transmission Oil in EC300 GASGAS
Ec 300 To change the transmission oil in the EC 300, position the bike so that you can work on it safely (for example, lean it against a wall as shown in th…
How to Install the Cylinder Assembly on a Gasgas EC300
How to Install the Cylinder Assembly on a Gasgas EC300
Ec 300 In this tutorial, you will see the main instructions for installing a new cylinder assembly consisting of a piston, rings, cylinder, and head, along …

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos