|
Do it yourself
| |||
| ||||
Model: Gasgas Ec 300
To change the fork oil on the GasGas EC 300, loosen the bolts securing the fork at the bottom, near the wheel, and at the top, near the handlebars. Once the fork is released, extract it and open it at the top so that the old oil can completely drain out. The new oil can then be added inside the fork, and it must be positioned back on the bike. Tighten the bolts at the top and also at the bottom.
Updated on 29 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Ec 300
To replace the fork oil on the GasGas EC300, first remove the front wheel by disconnecting the brake caliper and removing the central pin. Once the w…
Ec 300
In this tutorial, you will see the main instructions for installing a new cylinder assembly consisting of a piston, rings, cylinder, and head, along …
Ec 300
To change the transmission oil in the EC 300, position the bike so that you can work on it safely (for example, lean it against a wall as shown in th…
|
How to Service the Beta RR 350
This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty). Finally, top up with new oil, of the correct type for your engine, filling to the maximum level! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
