Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. : Crankshaft position sensor

Crankshaft Position Sensor - DIY video guide
s

Benelli Tnt 600
How to Replace the Rev Sensor on a Benelli TNT 600
This guide provides instructions on how to remove and replace the engine rev sensor on a Benelli TNT 600 motorcycle by following these simple steps. First, …Read all…
Posted on 6 August 2026 by ScegliAuto
Harley Davidson Dyna
How to Replace the Engine Speed Sensor on a Harley Davidson Dyna
Today's guide will show you the main steps to remove and replace the engine speed sensor on a Harley Davidson Dyna motorcycle. First, place the bike on a stand …Read all…
Posted on 14 July 2026 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos