Do it yourself
Frequently asked questions about cars and motorcycles
Today's guide will show you the main steps to remove and replace the engine speed sensor on a Harley Davidson Dyna motorcycle. First, place the bike on a stand and start unscrewing the mounting screws for the speed sensor, which are located behind the cylinders; then disconnect its electrical connector to remove it, as shown in the video. At this point, install the new engine speed sensor, as well as the original one; then check the engine speed operation by following the video tutorial to the end!

Updated on 14 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Dyna Below are the instructions for removing and replacing the battery on a Harley Davidson Dyna motorcycle. First, place the bike on a stand and start by…
Dyna The following steps will guide us through the process of disassembling and replacing the rear engine mount of the Harley Davidson Dyna. First, we pla…
Dyna This brief guide provides instructions on how to remove and replace the engine mount on the Harley Davidson Dyna. First, place your motorcycle on a s…

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos