Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the motor oil in the Harley-Davidson Iron 883?
How to replace the motor oil in the Harley-Davidson Iron 883?
Iron .. see how to replace the motor oil in the Harley-Davidson Iron 883, an extremely simple and quick operation. First of all, make sure that the engine is.. …
Engine Oil and Oil Filter Replacement on a Harley Davidson Iron 883
Engine Oil and Oil Filter Replacement on a Harley Davidson Iron 883
Iron .. the engine oil and oil filter on a Harley Davidson Iron 883. First, place your bike on a stand and start by unscrewing the drain bolt found on.. …
How to replace the clutch discs on a Harley Davidson Sportster 883 Iron
How to replace the clutch discs on a Harley Davidson Sportster 883 Iron
Iron In this video, see how to disassemble and replace the clutch discs on a Harley Davidson Sportster 883 Iron. First, position your bike on the stand an…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos