Do it yourself
Frequently asked questions about cars and motorcycles
Today, we will go through the steps to perform the routine maintenance service by replacing the engine oil and oil filter on a Harley Davidson Iron 883. First, place your bike on a stand and start by unscrewing the drain bolt found on the sump, allowing the oil to drain into a container for about ten minutes. Then, use the appropriate tool to unscrew and replace the oil filter cartridge, tightening it by hand gently. Finally, unscrew the filler cap and top up the oil, pouring in the suitable oil for your engine!

Updated on 17 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Iron Today, you will replace the engine oil and oil filter as part of the regular maintenance service for the Harley Davidson Iron 883. First, place the m…
Iron In this tutorial we can see how to replace the motor oil in the Harley-Davidson Iron 883, an extremely simple and quick operation. First of all, make…
Iron In this tutorial, we can see how to replace the engine oil in the Harley-Davidson Iron 883, an extremely simple and quick operation. First of all, le…

How do you reset the Oil Check light on the Sym VF 185?

In order to reset the Oil Check light on the Sym VF 185, you need to turn on the instrument panel by turning the key in the ignition switch. Once the panel is on, you can press and hold the button located at the bottom right of the instrument panel for a few seconds. You will need to continue holding the button for a few seconds and then release it before pressing the next button. This will make the Oil Check light disappear from the instrument panel, and you can turn it off again by turning the key in the opposite direction.

Watch the video!


by ScegliAuto

More videos