Do it yourself
Frequently asked questions about cars and motorcycles

Model: Harley Davidson Iron
Part: Engine oil

Today we will replace the motor oil and oil filter, performing the regular maintenance check-up of the Harley Davidson Iron 883 motorcycle. First, we put the motorcycle on a stand and begin to unscrew the oil drain bolt located under the engine, letting it drain into a container for about ten minutes. Then, we unscrew and remove the oil filter cartridge, replacing it with a new one, as shown in the video. At this point, we unscrew the oil fill cap and top off with oil suitable for our engine and transmission, filling it up to the maximum level.


Posted on 17 October 2024 by ScegliAuto



Harley Davidson Iron 883 engine oil and oil filter replacement
Iron Let's find out today the steps on how to carry out the routine maintenance service, replacing the engine oil and oil filter, of the Harley Davidson I
How to replace engine oil in Harley-Davidson Iron 883?
Iron In this tutorial we can see how to change the engine oil in Harley-Davidson Iron 883, a very simple and fast operation, to be done every 12 months. F
How do you replace the air filter of the Harley Davidson Iron 883?
Iron To replace the air filter of the Harley Davidson Iron 883, you need to loosen the screws that hold the component in question to its housing: this wil

How to replace the motor oil in the Yamaha Tracer 900?

In this tutorial we can see how to replace the engine oil in the Yamaha Tracer 900, an extremely simple and quick operation. First of all, we wait for the engine to be cold enough, then we place a container under the motorcycle, locate the drain hole bolt and unscrew it using a 17mm socket wrench. We then let all the oil in the system drain out, unscrew the old filter, and tighten both the replacement and the bolt. At this point, all that's left to do is to pour in the required amount of oil through the designated top hole.

Watch the video!


by ScegliAuto

More videos