Do it yourself
Frequently asked questions about cars and motorcycles
In this video, see how to disassemble and replace the clutch discs on a Harley Davidson Sportster 883 Iron. First, position your bike on the stand and start draining the engine oil by unscrewing the oil drain bolt; then remove the left clutch cover by unscrewing the screws with a socket spanner. At this point, loosen the clutch cable and remove the pressure plate; use a puller to remove the clutch discs, compressing the spring. Replace the discs and reassemble everything, following the video to the end!

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Iron Below are the instructions that will allow you to remove and replace the exhaust on the Harley Davidson Iron 883 Sportster. First, put the side stand…
Iron It will be possible to replace the clutch of the Harley Davidson Iron by loosening the screws that secure the transmission cover, located on the righ…
Iron In this video, follow the instructions to remove and replace the battery of the Harley Davidson Iron 883. First, place your motorcycle on the stand a…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos