Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a Piaggio X8 125

Model: Piaggio X8 125
Part: Service warning light

Video tutorial

If you own a Piaggio X8 125 and want to manually reset the service light, then this mini guide is all you need. First, ensure that the Piaggio X8 125 is completely off and correctly positioned on its stand.

Next, locate the two small buttons below the mini display of the dashboard and press the right one. At the same time, turn on the ignition and release the button as soon as the light starts to flash. At this point, press and hold the left button and release it once the reset is complete.


Updated on 6 July 2026 by ScegliAuto


Related tutorials

X8 125 These short and simple steps will show us how to disassemble and replace the battery of the Piaggio X8 125 scooter. First of all, we put the scooter …
X8 125 In today's tutorial, you will learn how to perform the routine maintenance oil change on the Piaggio X8 125 scooter in simple and quick steps. First,…
X8 125 To replace the headlamp bulb on a Piaggio X8, first remove the cover at the base of the wing mirrors to access the screws underneath and detach the m…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos