Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The exhaust of the MV Agusta Brutale 1000RR can be removed by removing the plastic panel located on the right side of the vehicle, in the area immediately before the exhaust. Under this cover, there will be screws that secure the exhaust: by loosening them and disconnecting the fixing ring that connects the exhaust to the rest of the exhaust manifold, it will be possible to detach it and replace it with a new spare part. The new exhaust must then be connected to the exhaust pipe and fixed to its housing through its supports.

Posted on 25 December 2024 by ScegliAuto

This video is currently unavailable

Related tutorials

How do you replace the exhaust pipe of the MV Agusta Brutale 1000RR?
Brutale 1000rr In order to replace the exhaust of the MV Agusta Brutale 1000RR, you need to loosen the screws that hold the exhaust terminal to its housing, so that…
How do you replace the exhaust of the MV Agusta Brutale 1000RR?
How do you replace the exhaust of the MV Agusta Brutale 1000RR?
Brutale 1000rr The exhaust of the MV Agusta Brutale 1000RR can be replaced by loosening the screws that secure the terminal to its housing, allowing it to be releas…
How do you replace the exhaust pipe of the MV Agusta Brutale 1000RR?
How do you replace the exhaust pipe of the MV Agusta Brutale 1000RR?
Brutale 1000rr To replace the exhaust installed on the MV Agusta Brutale 1000RR, you must loosen the screws that secure the exhaust terminal to its housing on the r…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos