Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the air filter of the MV Agusta F3 800 by loosening the screws that fix the front shield of the motorcycle to its seat, so that the latter can be completely removed: these screws will be located on the front sides of the vehicle and once loosened they will allow to lift the panel from its seat. Underneath it, there will be the filter box, which can be opened and the filter inside it can be extracted: at this point, the box can be closed and the front panel of the motorcycle can be reinserted.

Posted on 7 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Water Pump on a MV Agusta F3 800
How to Replace the Water Pump on a MV Agusta F3 800
F3 800 This guide provides the main instructions on how to remove and replace the water pump on the MV Agusta F3 800 motorcycle. To access the water pump, y…
How to Change the Engine Oil and Oil Filter on an MV Agusta F3 800
How to Change the Engine Oil and Oil Filter on an MV Agusta F3 800
F3 800 In this guide, discover how to change the engine oil and oil filter on an MV Agusta F3 800 by following these simple and quick steps. First, place th…
How to Change the Engine Oil on the MV Agusta F3 800
How to Change the Engine Oil on the MV Agusta F3 800
F3 800 To replace the engine oil on the MV Agusta F3 800, loosen the screws securing the engine guard at the central lower part of the vehicle: beneath this…

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos