Do it yourself
Frequently asked questions about cars and motorcycles

Model: Mvagusta F3 800
Part: Pump

This guide provides the main instructions on how to remove and replace the water pump on the MV Agusta F3 800 motorcycle. To access the water pump, you need to remove the seat and the fuel tank, then disassemble the air filter box and the throttle body; disconnect the water pump hoses, allowing the fluid to drain and replace the pump with the new original one. Now reassemble all the engine components, then top up with the appropriate new coolant; finally, start the engine!

Posted on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

F3 800 In order to replace the rear shock absorber of the MV Agusta F3 800, you need to loosen the screws that hold it to its housing: these screws will be …
F3 800 On the MV Agusta F3 800 it will be possible to replace the exhaust after removing the plastic cover located on the right side of the bike, in the are…
F3 800 In this brief guide, learn how to correctly adjust the tension of the transmission chain on the 2017 MV Agusta F3 800. First, place the bike on its s…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos