Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, we will look at the instructions that will allow us to carry out the regular maintenance service by replacing the engine oil and oil filter on the MV Agusta Brutale. First, place the bike on the stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge with the appropriate tool, replacing it with a new one. Top up with new engine oil, pouring the correct amount, unscrewing the upper filler cap, and then start the engine!

Posted on 2 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Perform Routine Maintenance on the Mv Agusta Brutale
How to Perform Routine Maintenance on the Mv Agusta Brutale
Brutale 675 In today's tutorial video, you will learn how to perform routine maintenance by changing the engine oil, brake pads, and lubricating the chain on the…
How to Replace the Exhaust on an MV Agusta Brutale 675
How to Replace the Exhaust on an MV Agusta Brutale 675
Brutale 675 You can replace the exhaust on an MV Agusta Brutale 675 by loosening the screws that secure the exhaust end can to its corresponding housing: this wi…
How do you replace the exhaust pipe of the MV Agusta Brutale 675?
How do you replace the exhaust pipe of the MV Agusta Brutale 675?
Brutale 675 The operation of replacing the muffler on the MV Agusta Brutale 675 is carried out by removing the plastic panel located on the right side of the mot…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos