Do it yourself
Frequently asked questions about cars and motorcycles

Model: Mvagusta Brutale 750
Part:

In this video tutorial, you will see how to remove the fuel tank from an Mv Agusta Brutale. First, remove the screws securing the side brackets by unscrewing with an Allen key; then remove the seat and unscrew the screws securing the tank found at its lower part. At this point, gently lift the tank and disconnect the fuel hose by removing the securing clip and the electrical connector for the reserve. Once removed, you will then refit it by applying the reverse procedure of disassembly!

Updated on 8 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Brutale 750 In this tutorial, you will learn how to remove and replace the coolant thermostat on the MV Agusta Brutale 750, as well as the Brutale 910. First, pl…
Brutale 750 To replace the EPROM of the MV Agusta Brutale ECU, first, remove the ECU by loosening the bolts that secure it to its housing and disconnecting the r…
Brutale 750 In this video, see how to remove and replace the rear wheel hub on an Mv Agusta Brutale, following the instructions below. First, position the rear s…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos