Do it yourself
Frequently asked questions about cars and motorcycles
In this video, we will see the instructions for removing the rear swingarm on an Mv Agusta F4 750, following the instructions outlined below. First, position the rear stand on your bike; then remove the rear wheel by using a pointed pliers to remove the pin and unscrewing the central wheel bolt with a socket wrench. At this point, you can unscrew all the screws of the swingarm, also disconnecting the rear suspension; it is recommended to pay particular attention to the installation of the swingarm, following the video to the end!

Updated on 11 April 2026 by ScegliAuto

Video tutorial

Related tutorials

F4 750 Before starting, lift the front end of your MV Agusta F4 750. Begin by unscrewing and removing the bolts that secure the two front brake calipers to …
F4 750 In order to replace the air filter of the MV Agusta F4 750, you need to completely remove the seat from its housing, so that you can access the compo…
F4 750 In order to replace the exhaust system of the MV Agusta F4 750, you need to loosen the screws that hold the exhaust terminal to its housing, so that …

How to Replace the Front Brake Pads on a Peugeot Elyseo 125

This guide briefly explains how to remove and replace the front brake pads on the Peugeot Elyseo 125 scooter. First, place your scooter on the centre stand and start unscrewing the bolts securing the front brake caliper to remove it from the disc; then, apply pressure to the caliper piston and clean it from any residual dirt, as shown in the video. At this point, remove and replace the brake pads with new, high-quality ones, installing them in the correct orientation and then refitting the brake caliper!

Watch the video!


by ScegliAuto

More videos