Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Chain on MV Agusta Brutale 675

Model: Mvagusta Brutale 675
Part:

Video tutorial

This guide shows how to replace the chain on the MV Agusta Brutale 675. The replacement kit includes the chain, the sprocket on the wheel, and the pinion at the engine. To determine when to replace the kit, you can perform two tests: the first is to check the play of the chain links on the sprocket; if it is excessive, it needs replacing; the second test is to check the tension of the chain relative to the rotation of the sprocket; if it varies greatly, the kit should be changed.

Some special tools are required for this operation. After placing the bike on a stand, engage a gear and disconnect the gear connector.

Using an 8mm spanner, detach the gear lever. Using a Torx 30, remove the pinion cover and turn the wheel so that the safety washer can be straightened.

With a torque wrench set to 140 Nm, loosen the pinion bolt and finish unscrewing it with a ratchet. Unscrew the nuts of the sprocket.

Using a chain breaker, locate the master link, proceed to remove the chain and the pinion; remove the sprocket. Check the correct size of the replacement kit. Clean the area involved.

Refit the sprocket and tighten the nuts; grease the side of the pinion that will contact the oil seal; loosen the two bolts of the swingarm and, using the chain tensioning tool, bring the hub to its end stop. In newer models, there is a screw on the support bracket of the caliper that needs to be loosened to allow chain adjustment.

Place the chain over the top of the sprocket, position it by sliding it. Rejoin the chain using the appropriate tool. Using the tensioning tool, set the chain to the correct tension and tighten the two screws on the swingarm.

Engage a gear and, after greasing it, insert the new safety washer on the pinion; after applying thread lock, install the pinion nut and tighten. Bend the safety washer and refit the pinion cover with thread lock on the screws.

Refit the gear lever and reconnect the gear connector. Tighten the sprocket nuts.

Pay attention to the torque specifications of the bolts; these are listed in the manual.


Updated on 16 April 2026 by ScegliAuto


Related tutorials

Brutale 675 You can replace the exhaust on an MV Agusta Brutale 675 by loosening the screws that secure the exhaust end can to its corresponding housing: this wi…
Brutale 675 To replace the exhaust on the MV Agusta Brutale 675, remove the plastic panel located on the right side of the bike, just in front of the exhaust. Un…
Brutale 675 On the MV Agusta Brutale 675, you can replace the exhaust by removing the plastic panel located on the right side of the bike, just in front of the e…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to replace the exhaust on a GasGas SM 700?

To replace the exhaust fitted on the GasGas SM 700, you will need to loosen the screws securing the left side panel of the mudguard: once this panel is removed, you will be able to locate the screws for the exhaust supports underneath. By loosening these screws, you can then widen the connection ring between the exhaust and the manifold: this will allow the exhaust end to be completely removed from its seat. The new part can now be inserted, securing it with the support screws and connecting it to the manifold.

Watch the video!


by ScegliAuto

More videos