Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service on MV Agusta F3

Model: Mvagusta F3 675
Part: Checks and maintenance

Video tutorial

First, open the upper hole of the engine oil tank, from which we will eventually add the new lubricant (see video), and only then unscrew the lower bolt from which the used lubricant will drain (so prepare a collection tray first). It is recommended to always unscrew in this sequence to avoid a vacuum and allow air circulation.

Let the old oil drain, ensuring that it all comes out. While this is happening, unscrew the small compartment containing the oil filter and replace it, remembering to lubricate the new part before insertion. Add the new oil. It is advisable to warm up the engine well before performing the service.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Perform Maintenance Service on an MV Agusta F3
How to Perform Maintenance Service on an MV Agusta F3
F3 675 In this guide, you will find instructions to replace the engine oil and oil filter, performing the regular maintenance service on an MV Agusta F3 675…
Guide to Change the Engine Oil on a MV Agusta F3 675
Guide to Change the Engine Oil on a MV Agusta F3 675
F3 675 In this brief guide, we will see how to change the engine oil while performing the regular maintenance service on the MV Agusta F3 675. First, remove…
How to Adjust the Chain on the MV Agusta F3 675
How to Adjust the Chain on the MV Agusta F3 675
F3 675 This guide will show you how to adjust the drive chain on the MV Agusta F3 675 motorcycle, as well as the F3 800. First, place the motorcycle on a st…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos