Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Racing Kit on the MV Agusta Superveloce 800?

Model: Mvagusta Superveloce 800
Part: Checks and maintenance

Video tutorial

To install the racing kit on the MV Agusta Superveloce 800, you need to loosen all the screws securing the components that will be replaced by the kit: start by removing the seat, then unscrew the screws fixing the side panels, the headlamp ring, and the side fairings.

Once all these fairings are removed, you can also unscrew the screws securing the footpegs and the exhaust supports, removing the exhaust from its place as well.

Once the new exhaust is connected and secured, you can refit the fairings, ensuring they are properly secured.


Updated on 2 July 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the MV Agusta Superveloce 800?
How do you replace the exhaust pipe of the MV Agusta Superveloce 800?
Superveloce 800 In order to replace the exhaust of the MV Agusta Superveloce 800, you need to loosen the screws that fix the exhaust terminal to its housing, on the …
How do you replace the exhaust on the MV Agusta Superveloce 800?
How do you replace the exhaust on the MV Agusta Superveloce 800?
Superveloce 800 The exhaust installed on the MV Agusta Superveloce 800 can be replaced by loosening the screws that secure it at the rear of the vehicle, immediately…
How do you replace the air filter of the MV Agusta Superveloce 800?
How do you replace the air filter of the MV Agusta Superveloce 800?
Superveloce 800 It will be possible to replace the air filter of the MV Agusta Superveloce 800 by loosening the screws that secure the side panels of the motorcycle …

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos