Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the MV Agusta Rivale 800?

Model: Mvagusta Rivale 800
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the MV Agusta Rivale 800, you need to loosen the fixing screws that secure the exhaust to its housing: after the screws fixing the exhaust to the supports have been removed, you can loosen the one that secures the clamp connecting the exhaust end to the rest of the exhaust pipe.

This way, the old exhaust can be completely removed, and the new one can be positioned: the latter must be secured to the appropriate supports and connected to the exhaust with the corresponding clamp.


Updated on 15 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the MV Agusta Rivale 800?
How to Replace the Air Filter of the MV Agusta Rivale 800?
Rivale 800 You can replace the air filter of the MV Agusta Rivale 800 by loosening the screws that secure the fuel tank to its housing: you will need to loosen …
How to Replace the Rear Headlamp Bulb on the MV Agusta Rivale 800?
How to Replace the Rear Headlamp Bulb on the MV Agusta Rivale 800?
Rivale 800 To replace the rear headlamp bulb on the MV Agusta Rivale 800, loosen the screws securing the headlamp to its housing at the rear. Once these screws …
How to Change the Engine Oil in a MV Agusta Rivale 800?
How to Change the Engine Oil in a MV Agusta Rivale 800?
Rivale 800 You can change the engine oil in the MV Agusta Rivale 800 by loosening the drain plug located at the central lower part of the vehicle. Once this plu…

How to Change the Engine Oil in a Yamaha XMAX 250 Scooter

In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 250 scooter, a very simple and quick operation to perform every 12 months. First, ensure the engine is cool enough, then place a container underneath it. Locate the drain bolt on the left side and, using a socket wrench, unscrew it completely. Allow all the oil in the system to drain out, then open the filter housing and proceed with its replacement. At this point, reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos