Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the clutch cylinder on the MV Agusta Brutale 750?

Model: Mvagusta Brutale 750
Part: Clutch

Video tutorial

To replace the clutch cylinder on the MV Agusta Brutale 750, loosen the screws that secure the cylinder to its housing on the right side of the bike. Once the screws connecting it to the supports are loosened, you can also widen the retaining ring that connects the cylinder to the designated pipe; this will allow you to completely remove the cylinder from its seat and insert the new replacement part.

The new part must be properly connected and secured, ensuring that the clutch operates correctly.


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Remove the Thermostat on an MV Agusta Brutale 750
How to Remove the Thermostat on an MV Agusta Brutale 750
Brutale 750 In this tutorial, you will learn how to remove and replace the coolant thermostat on the MV Agusta Brutale 750, as well as the Brutale 910. First, pl…
How to Remove the Engine from the MV Agusta Brutale 750?
How to Remove the Engine from the MV Agusta Brutale 750?
Brutale 750 To remove the engine from the MV Agusta Brutale 750, loosen the screws that secure it to the corresponding mounts: these screws will be located at th…
How to Replace the EPROM of the MV Agusta Brutale ECU
How to Replace the EPROM of the MV Agusta Brutale ECU
Brutale 750 To replace the EPROM of the MV Agusta Brutale ECU, first, remove the ECU by loosening the bolts that secure it to its housing and disconnecting the r…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos