Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Rogue
    4. : Starter motor

Nissan Rogue - Starter motor

Starter Motor Nissan Rogue (2008-2015 / s 35)

Nissan Rogue (2008-2015 / S35)
How to replace the starter motor in the Nissan Rogue?
In this tutorial, we can see how to replace the starter motor in the Nissan Rogue, a simple operation that requires good manual skills. First of all, make sure …Read all…
Posted on 26 July 2025 by ScegliAuto
Nissan Rogue (2008-2015 / S35)
How to Replace the Starter Motor on a Nissan Rogue?
To replace the starter motor on a Nissan Rogue, lift the vehicle and loosen the bolts securing the right front wheel so it can be completely removed. After …Read all…
Posted on 14 July 2026 by ScegliAuto
Airbag (2) Alternator (1) Speaker (2) Air conditioning (1) Car stereo (3) Roof rack bars (1) Battery (5) Air vents (1) Spark plugs (3) Body (2) Glove compartment (1) Key (20) V-belt (2) Onboard computer (2) Checks and maintenance (8) Oil pan (1) Bearing (1) Differential (1) Headlight (6) Tail light (2) Fog lights (2) Air filter (6) Cabin air filter (11) Light bulb (3) Headlight bulb (5) Tail light bulb (6) License plate light (4) Handle (2) Starter motor (2) Engine oil (5) Clock (7) Door trim panel (3) Front bumper (5) Rear bumper (2) Brake pads (5) Shift knob (1) Car door (1) Instrument cluster (4) Wheel (1) Fuse box (20) Seat (1) Parking sensors (1) Side mirror (2) Rearview mirror (2) Warning light – error code (9) (2) Tire pressure warning light (2) Service warning light (34) Windshield wipers (7) Blower motor (6)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos