Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Right Front Door Panel of the Nissan Micra

Model: Nissan Micra K12 - Years 2002-2010

The video shows how to remove a right panel, but the steps are the same for the left side. Unscrew the plastic crown of the door opening lever by prying at the edges, then lift the plastic covering the door latch cavity. Disconnect the connector by pressing the release lever, unscrew the central fixing screw of the panel, and remove it by prying at the sides (be careful during this operation to avoid breaking the clips). Repeat the same steps in reverse for reassembling the panel.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Door Panel of a Nissan Micra
How to Remove the Front Door Panel of a Nissan Micra
Nissan Micra (2017-2024 / K14) Here are the steps to remove the front door panel of a Nissan Micra. First, open the front door and unscrew all the fixing screws located on the side…
Removing the Door Panel from the Nissan Micra K12
Removing the Door Panel from the Nissan Micra K12
Nissan Micra (2002-2010 / K12) In today's video, see the steps to remove the front door panel from the Nissan Micra K12. First, open the front door and start by removing the plasti…
Removing the Door Panel on a Nissan Micra
Removing the Door Panel on a Nissan Micra
Nissan Micra (1992-2002 / K11) How to remove the door panel located on a Nissan Micra? Here’s how to proceed. Use a lever to remove the plastic cover of the internal handle; detach…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos