Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Mirror on Nissan Qashqai J10

Model: Nissan Qashqai J10 - Years 2006-2014
Part: Side mirror

Using a plastic lever or flat screwdriver, remove the upper plastic of the silver internal door handle. Unscrew the two now exposed screws and remove all the plastic that was secured by them and frames the opening handle. Remove the door panel by detaching it and disconnecting the connector. At this point, also remove the upper plastic near the window and disconnect the mirror. Now you can finally remove it. Install the new mirror, which will be one piece with the protection near the window, and reassemble all the removed parts in reverse order.

Updated on 3 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Glass of the External Wing Mirror on a Nissan Qashqai?
How to Replace the Glass of the External Wing Mirror on a Nissan Qashqai?
Nissan Qashqai (2006-2014 / J10) The video authors show how to replace the glass of the external wing mirror on a Nissan Qashqai J10. Use adhesive tape to protect the lower edge of t…
How to Replace the Wing Mirror Cover on the Nissan Qashqai
How to Replace the Wing Mirror Cover on the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Today, you will learn how to replace the outer wing mirror cover on the Nissan Qashqai model J10. The first step in replacing the outer mirror is to …
How to Replace the Glass of the External Wing Mirror of the Nissan Qashqai
How to Replace the Glass of the External Wing Mirror of the Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) To replace the glass of the external wing mirror of the Nissan Qashqai, start by protecting the plastic of the mirror with tape. Use a plastic tool t…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos