Do it yourself
| ||||
|
Vauxhall Antara - Headlight
Vauxhall Antara (2006-2015 / MK 1)
How to disassemble the front headlight of the Opel Antara? To remove the front headlights of the Opel Antara, it is necessary first of all to remove the grille located at the front of the engine compartment. Let's then …read all… Posted on 3 August 2023 by ScegliAuto
Vauxhall Antara (2006-2015 / MK 1)
How to change the headlight on an Opel Antara Disassembling this light can be used both to replace it, but also to replace one of its bulbs as the internal maneuvering space does not allow us to do it …read all… Posted on 9 December 2023 by ScegliAuto
Vauxhall Antara (2006-2015 / MK 1)
How to replace the front fog light on the Opel Antara To start this process, unhook the hood from the special lever to be able to lift it and fix it with the special rod, now then remove the clips on the upper …read all… Posted on 28 September 2023 by ScegliAuto
Vauxhall Antara (2006-2015 / MK 1)
How to replace the headlights on the Opel Antara As a first operation, obviously unhook the hood from the special lever to be able to lift it and fix it with the appropriate rod, now then remove the clips on …read all… Posted on 28 September 2023 by ScegliAuto
Vauxhall Antara (2006-2015 / MK 1)
Opel Antara headlight replacement The replacement of the headlight is very simple to carry out and does not require special precautions; therefore once the front bonnet is open, remove all the …read all… Posted on 4 September 2023 by ScegliAuto Airbags (2) Alternator (1) Car stereo (1) Key (1) Checks and maintenance (7) Brake discs (1) Headlight (5) Cabin air filter (3) Diesel filter (1) Oil filter (1) Accessory Kit (1) Headlight bulb (2) Handle (1) Engine oil (5) Instrument cluster (1) Fuse box (8) Seat (1) Outside rearview mirror (1) Windscreen wipers (1) |
How do you adjust the clutch cable on the Kia Picanto?To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |