Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Crossland X
    4. : Onboard computer

Vauxhall Crossland X - Onboard computer

Onboard Computer Vauxhall Crossland X (2017-2024 / mk 1)

Vauxhall Crossland X (2017-2024 / MK 1)
How to activate and deactivate traction control on an Opel Crossland
The traction control system on Opel Crossland vehicles is deactivated by pressing the ESP button located on the central dashboard. To perform the procedure, …Read all…
Posted on 21 October 2026 by ScegliAuto
Vauxhall Crossland X (2017-2024 / MK 1)
How do you activate and deactivate the eco-mode on the Opel Crossland-X?
Let's see how to activate and deactivate the Eco-mode on the Opel Crossland-X. On the central dashboard, there is a button with the word "Eco" or with the …Read all…
Posted on 23 October 2025 by ScegliAuto
Vauxhall Crossland X (2017-2024 / MK 1)
How to Set the Automatic Door Lock Function on an Opel/Vauxhall Crossland-X
In this video, you can see how to set the automatic door locking function from inside an Opel/Vauxhall Crossland-X with navigation. This is a very simple …Read all…
Posted on 6 September 2026 by ScegliAuto
Car stereo (1) Key (8) Timing belt (1) Onboard computer (3) Checks and maintenance (13) Dashboard (2) Cabin air filter (7) Parking brake (3) Light bulb (1) Engine oil (1) Clock (3) Rear bumper (1) Tires (1) Instrument cluster (2) Fuse box (14) Seat (3) Brake system (1) AdBlue warning light (3) Warning light – error code (5) (1) Tire pressure warning light (26) Service warning light (49) Fuel cap (1) Windshield wipers (1)

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos