Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace a Blown Dipped Beam Bulb

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Headlight bulb

See other generations:
This video is currently unavailable

Open the bonnet. If you need to replace the passenger side bulb and lack sufficient space, first remove the air filter by unscrewing the retaining screw, then disconnect the mass airflow sensor and finally extract it. Remove the insulating cover on the headlight to access the bulb connectors.

Gently remove the connector from the blown bulb. Use a flat screwdriver to lever out the bulb's clips.

Now proceed with the bulb replacement, taking care not to touch the glass with bare hands. Fit it into its housing, and before closing the headlight compartment, perform a functionality test.

If everything works, proceed to reassemble the air filter. This procedure relates to the Opel Corsa D.


Updated on 2 February 2026 by ScegliAuto


Related tutorials

How to Activate or Deactivate the Dipped Headlights of the Opel Corsa Model F
Vauxhall Corsa (2019-2026 / Corsa F) Today, we will show you how to activate or deactivate the dipped headlights of the Opel Corsa Model F. To perform this operation, start the vehicle a…
How to Replace the Front Headlamp Bulb in a 2010 Opel Corsa?
How to Replace the Front Headlamp Bulb in a 2010 Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) The bulb in the 2010 Opel Corsa, focusing on the front headlamp, is one of the simple tasks to carry out in DIY maintenance, as demonstrated in the v…
How to Replace the Dipped Beam Bulb on an Opel Corsa C
How to Replace the Dipped Beam Bulb on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) This brief video guide demonstrates how to replace the dipped beam bulb on a third-generation Opel Corsa, produced from 2000 to 2006. First, pull the…

How to Activate Cruise Control on the Peugeot 3008

Today's steps will show you how to activate cruise control on the Peugeot 3008, following the instructions below. First, get into the vehicle and start the engine. To activate cruise control, you must reach a minimum speed. Then, activate cruise control using the central button on the left stalk, adjusting the speed with the buttons; use the dial to set the speed limit. Pressing the brake pedal will automatically disable the cruise control system.

Watch the video!


by ScegliAuto

More videos