Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Corsa
    4. : How to reset the oil service on the Opel Corsa?

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa E - Years 2014-2019
Part: Engine oil
Operation: How to reset the oil service on the Opel Corsa?

In this tutorial we can see how to reset the oil service in the Opel Corsa, an extremely simple and fast operation. Before proceeding, we must have completed the scheduled maintenance work required. Let's start by going inside the cabin, then turn on the instrument panel and, with the "MENU" button on the left control lever, move to the vehicle information tab. We then reach the remaining oil life using the rotary dial, press the "SET/CLR" button and confirm the reset. To verify that the operation was successful, we can restart the vehicle.


Posted on 20 February 2024 by ScegliAuto

    Frequently Asked Questions

    • Corsa 2006-2014 - What is the correct amount of motor oil for the Opel Corsa 1.3 CDTi? Read Answer
    • Corsa 1993-2000 - How many liters of oil are needed for the gearbox on the Opel Corsa? Read Answer
    • Corsa 2014-2019 - How do I access the Opel Corsa engine oil percentage of life indicator light? Read Answer
    • Corsa 2014-2019 - How many liters of oil go into the Opel Corsa 1.2 petrol? Read Answer
    • Corsa 2006-2014 - What to do when the oil warning light appears on Opel Corsa? Read Answer
    • Corsa 2014-2019 - What does the Opel Corsa's oil change light mean? Read Answer
    • Corsa 2014-2019 - What does the lit oil pia on the Opel Corsa mean? Read Answer
    • Corsa 1993-2000 - Where is the oil cap of the Opel Corsa B located? Read Answer
    • Corsa 2006-2014 - How much does the oil and filter change cost for the Opel Corsa 1.3 multijet? Read Answer
    • Corsa 2006-2014 - How many liters of oil for the maintenance of the 2007 1.2 petrol Opel Corsa? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos