Do it yourself
Frequently asked questions about cars and motorcycles

Model: Peugeot Django
Part: Brake pads

In order to replace the front brake pads of the Peugeot Django, you need to loosen the screws that secure the brake caliper to its housing on the front wheel disc: once the caliper has been removed from its housing, you can remove the pin that locks the pads inside. Once the old pads have been removed, you can position the new ones so that they are locked in place with the new pin: the brake caliper can now be repositioned on the disc to secure it with the screws and check that everything is working properly.

Posted on 11 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Django To replace the engine oil on a Peugeot Django, you need to unscrew the drain plug located at the lower central area of the bike. Once the plug is rem…
Django In order to replace the transmission of the Peugeot Django, you need to loosen the screws that fix the specific casing, located near the rear wheel o…
Django In order to replace the handles of the Peugeot Django, you need to loosen the central screws located at the ends of the handlebars: once these screws…

How to Change the Engine Oil in a Royal Enfield 500?

In this tutorial, you will learn how to change the engine oil in a Royal Enfield 500, an extremely simple and quick operation to be performed every 12 months. First, ensure that the engine is cold, then place a container underneath and, using a 10mm socket, unscrew the two bolts related to the drain holes. Once the oil has drained from the system, open the filter cap using the same socket, insert the replacement, and reassemble everything in reverse order. Finally, pour in new 15W50 oil through the upper hole.

Watch the video!


by ScegliAuto

More videos