Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Transmission on a Peugeot Citystar 125?

Model: Peugeot Citystar 125
Part: Drivetrain

Video tutorial

You can replace the transmission on a Peugeot Citystar 125 by loosening the screws that secure the corresponding cover located near the rear wheel on the left side: once the cover has been completely removed, proceed to loosen the screws that secure the variator and the clutch, also removing the belt positioned around them.

This way, you can insert all the new components into their housing, securing them and inserting the belt to check its operation.


Posted on 1 March 2026 by ScegliAuto


Related tutorials

How to Replace the Wing Mirror on a Peugeot Citystar 125
How to Replace the Wing Mirror on a Peugeot Citystar 125
Citystar 125 To replace the wing mirror on a Peugeot Citystar 125, lift the plastic cover at the base of the mirror support. Once this cover is removed, you can a…
How to Replace the Spark Plug on the Peugeot Citystar 125?
How to Replace the Spark Plug on the Peugeot Citystar 125?
Citystar 125 To replace the spark plug on the Peugeot Citystar 125, remove the side fairings to access the components beneath the fuel tank. Next, disconnect the …
How to Replace the Fuel Pump on a Peugeot Citystar 125?
How to Replace the Fuel Pump on a Peugeot Citystar 125?
Citystar 125 To replace the fuel pump on a Peugeot Citystar 125, remove the protective panel located in the footwell of the bike and the one at the base of the se…

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos