|
Do it yourself
| |||
| ||||
|
Model: Peugeot Citystar 125
To replace the spark plug on the Peugeot Citystar 125, remove the side fairings to access the components beneath the fuel tank. Next, disconnect the coil connected to the spark plug and remove it from its housing using a 16mm socket. Once the old spark plug is removed, insert the new replacement part. The new spark plug should then be connected to the coil, and the previously removed side fairings can be reinstalled.
Updated on 27 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Citystar 125
In order to replace the engine oil of the Peugeot Citystar 125, you need to loosen the drain plug in the central lower part of the motorcycle: once t…
Citystar 125
To change the engine oil of the Peugeot Citystar 125, remove the oil drain plug located at the bottom of the bike between the stand and the rear whee…
Citystar 125
To replace the coolant in the Peugeot Citystar 125, open the designated drain plug located on the right side of the bike. To open the plug, you will …
|
How to reset the oil light on the Honda SH 125
If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
