Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video tutorial, you will learn how to remove and replace the front headlamp bulb on a Peugeot Kisbee 50cc scooter. First, remove the screws securing the rear fairing of the headlamp using a Torx key; then remove the front fairing of the headlamp, extracting it as well. At this point, remove the rubber protective cap to access the bulb: pull out the entire bulb holder and remove the bulb. Replace it with the new one of the correct type and reassemble it by following the reverse procedure of disassembly!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlight Bulb of the Peugeot Kisbee?
How to Replace the Headlight Bulb of the Peugeot Kisbee?
Kisbee To replace the headlight bulb of the Peugeot Kisbee, first loosen the four screws that secure the front fairing: these screws are located on the insi…
Removing and Replacing the Front Brake Pads on the Peugeot Kisbee
Removing and Replacing the Front Brake Pads on the Peugeot Kisbee
Kisbee Today, you will learn how to remove and replace the front brake pads on the Peugeot Kisbee scooter. First, place the scooter on its centre stand and …
Replacing the front brake pads on the Peugeot Kisbee
Replacing the front brake pads on the Peugeot Kisbee
Kisbee This guide will show you how to remove and replace the front brake pads on the Peugeot Kisbee scooter, following these simple steps. First, place the…

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos