Do it yourself
| ||||
|
Model: Peugeot Kisbee
To replace the headlight bulb of the Peugeot Kisbee, you need to loosen the four screws that secure the front fairing: these screws will be located on the inside of the shield, just below the handlebars. After they have been loosened, it will be possible to remove the front fairing and gain access to the back of the headlight by disconnecting its connector. Once the headlight has been disconnected, the protective cover can be removed and the corresponding bulb can be extracted from inside. Then, the new bulb can be inserted and all previously removed components can be reassembled.
Posted on 6 May 2023 by ScegliAuto
|
How to reset the Aprilia Scarabeo 300 serviceTo reset the service of the Scarabeo 300, we start by switching on the instrument panel, we notice that the service light (wrench) is on, then we proceed with the reset; with the instrument panel off, we hold down the button on the right under the display of the panel and at the same time we turn on the instrument panel, at this point we notice that the service light (wrench) is flashing and we wait a few minutes with the button still pressed until that the new kilometers for the next service do not appear and the warning light goes off; as soon as the new kilometers have appeared we can release the button and we can turn off the instrument panel. Finally we turn it back on to check if the new kilometers appear correctly. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |