Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Ignition Switch on a Piaggio Vespa 50 Sprint?

Model: Piaggio Vespa 50 Sprint
Part: Door lock

Video tutorial

To replace the ignition switch on the Piaggio Vespa 50 Sprint, loosen the screws that secure the internal fairing of the scooter located under the handlebars. By loosening these screws, you can completely detach the fairing to access the underlying components.

Here, you will find the ignition switch, which must be removed from its housing by unscrewing the screws and disconnecting the connectors. At this point, insert the new switch, secure it properly, and connect it to the connectors, finally covering everything with the panel.


Updated on 10 August 2026 by ScegliAuto


Related tutorials

How to Replace the Variator on a Piaggio Vespa 50 Sprint
How to Replace the Variator on a Piaggio Vespa 50 Sprint
Vespa 50 Sprint To replace the variator on a Piaggio Vespa 50 Sprint, you need to loosen the screws that secure the transmission cover located on the left side of th…
How to Replace the Air Filter on the Piaggio Vespa 50 Sprint?
How to Replace the Air Filter on the Piaggio Vespa 50 Sprint?
Vespa 50 Sprint To replace the air filter on the Piaggio Vespa 50 Sprint, loosen the screws that secure the cover to its housing, located immediately above the trans…
How to Install the Windscreen on the Piaggio Vespa 50 Sprint?
How to Install the Windscreen on the Piaggio Vespa 50 Sprint?
Vespa 50 Sprint To install the windscreen on the Piaggio Vespa 50 Sprint, first insert the appropriate mounting brackets that will support the windscreen. These shou…

How to Replace the Front Brake Pads on an Aprilia RS 457?

The front brake pads on an Aprilia RS 457 can be replaced by unscrewing the bolts that secure the caliper to the corresponding disc, allowing it to be removed: once the caliper has been removed, you can slide out the pin that holds the pads in their place. At this point, remove the old ones to insert the new ones: these must be secured with the appropriate pin, so that you can then reposition the caliper onto the disc. Now, secure the caliper with the bolts to ensure that the brake is functioning.

Watch the video!


by ScegliAuto

More videos